讯海轴承/SKF/圆柱滚子轴承/NUP 2311 ECP

SKF NUP 2311 ECP 圆柱滚子轴承 55×120×43 mm斯凯孚 · 瑞典

圆柱滚子轴承 · 主要尺寸 55×120×43 mm

SKF NUP 2311 ECP 圆柱滚子轴承

关键尺寸

55内径 d / mm
120外径 D / mm
43宽度 B / mm

资料下载

SKF NUP 2311 ECP 技术参数

尺寸
SKF NUP 2311 ECP 尺寸示意图
孔径55 mm
外径120 mm
宽度43 mm
孔径55 mm
外径120 mm
宽度43 mm
内圈挡边直径77.5 mm
外圈挡边直径100.3 mm
内圈滚道直径70.5 mm
倒角尺寸2 mm
活动挡边环的倒角直径2 mm
性能
基本额定动荷232 kN
基本额定静负荷232 kN
参考转速6000 r/min
极限转速7000 r/min
SKF 性能等级SKF Explorer
属性
轴承部件整套轴承
轴向位移能力无
列数1
定位特征,轴承外圈不带
孔类型圆柱孔
保持架非金属
法兰数量,外圈2
挡边数量,内圈1
活套法兰内圈活套法兰
径向游隙CN
公差等级正常
涂层不带
密封不带
润滑剂无
补充润滑功能不带
新产品的指示性碳足迹8.5 kg CO<sub>2</sub>e
挡肩尺寸
SKF NUP 2311 ECP 挡肩尺寸示意图
隔套直径65 mm
轴挡肩直径80 mm
轴承座挡肩直径109.2 mm
圆角半径2 mm
数据计算
SKF 性能等级SKF Explorer
基本额定动荷232 kN
基本额定静负荷232 kN
疲劳载荷限值30.5 kN
参考转速6000 r/min
极限转速7000 r/min
最小载荷系数0.25
极限值0.3
计算系数0.4

产品说明

Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one integral flange and one loose flange ring on the inner ring, NUP design bearings can locate the shaft axially in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

尺寸图纸

SKF NUP 2311 ECP 尺寸图纸

点击图纸可放大查看,再次点击关闭。

同尺寸其他型号

以下型号与 SKF NUP 2311 ECP 的主要尺寸相同(d 55 × D 120 × B 43 mm),可用于同尺寸替代选型。

同系列相近型号